Precaucións para a instalación e proba da máquina de granalladora tipo gancho ¼ˆä¸ € ï¼ ‰

2021-06-03

Ogranalladora tipo ganchoxeralmente ten un aspecto maior e o proceso de instalación é relativamente máis complicado que o de equipos pequenos. A instalación correcta e a máquina de proba son a clave para garantir o funcionamento normal dos equipos posteriores. No caso de operacións iniciais non cualificadas, os usuarios deberán seguir estritamente as instrucións do persoal correspondente ou consultar as instrucións. Un funcionamento non autorizado pode causar facilmente danos irreversibles aomáquina de chorro de gancho. Oshot blasting machine manufacturer has sorted out the precautions for installation and test machine to share with you. I hope it will be helpful to users who use the device for the first time.
1. Installation. Ogranalladora tipo gancho is installed and debugged in the production plant and disassembled into several parts before being transported to the user site for installation. Although there is no pit, the foundation must be firm, the anchor bolt holes must be standardized, and the chamber body must be adjusted. After the second irrigation, the anchor bolt nuts can be tightened after solidification. After the chamber body is fixed, the various parts can be installed. Oprecautions for the installation and debugging of the relevant components are introduced below.
1. Dispositivo de granallado:
Oshot blasting device has been installed on the chamber body before leaving the factory. Please pay attention to the problems to be debugged before use. Check whether the fixed positions of the blade, the pill wheel, the directional sleeve, and the guard plate are accurate and firm, and check whether the direction of rotation is correct after power on. Then adjust the position of the directional sleeve opening. Theoretically, the angle between the front edge of the directional opening and the front edge of the blade throwing position is about 900. After fixing the position of the directional sleeve, the position of the projectile belt can be detected by hanging Place a steel plate or wooden board on the position of the workpiece facing the exit of the shot blasting machine, start the shot blasting machine, put a small amount (2-5kg) of projectiles into the blasting tube, and then stop, check whether the hit position on the steel plate is suitable for the needs, such as Close the window of the bias-adjustable directional sleeve downwards, and vice versa, until it fits, and note the position of the directional sleeve opening as a basis for future replacement of the directional sleeve.
2. Transporte de grúa e parafuso:
Primeiro realice unha proba sen carga para comprobar se o cubo de elevación e as palas en espiral están funcionando na dirección correcta, logo aperte a cinta do polipasto a un grao de tensión moderado para evitar desviacións e despois realice unha proba de carga para comprobar a operación e capacidade de transporte, se existe algunha estrañeza Ruído e vibracións, comprobar e eliminar obstáculos.
3. Separador pílula-area:
Primeiro comprobe se o movemento do ariete é flexible e, a continuación, comprobe a posición correcta da placa de separación, despois cando o polipasto está cargado e depurado, hai fluxo continuo de disparos de aceiro e comprobe se os disparos de aceiro saen e caen cando se descarga o chute
  • QR
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy